Pressure Plate
From GMod Wiki
Pressure Plate
| Pressure Plate: Pressure Plate |
 Description: | This is a way of creating a pressure plate, so that when someone steps on it, they go BOOM! |
 Original Author: | Apocalypsefu |
 Created: | Jan 18 2009 |
| Notes: | - |
- First you need to get out a plate that you would like to use as the plate. I used a 1x1 metal plate from Phoenix's mod.
- Once you get the plate place it on the ground and raise it off the ground a little bit. And freeze it there.
- Get the normal hydraulic tool out, and go under the plate and in the middle make a hydraulic by hitting the right mouse button to create a hydraulic perpendicular to the ground.
- Then unfreeze it and it should be just above the ground, if its not it may weigh to much. So you can use a different plate or take out the weight tool and change the weight.
- Now raise the plate again to be able to place your wire gates under it. And freeze it.
- Take out the ranger tool and place it under the plate so the beam hits the plate.
- Place a less than gate on the ground under the plate and a constant value. The value will be what the ranger says when the plate is unfrozen and just hovering over the ground. Like when i did it, my constant value was 5.
- Now take out the wire tool, and wire the "A" of the less then gate to the ranger, and the "B" to the constant value.
- Now for the trap, I used a flat bomb from the explosives (simple) and the only thing that matters is the trigger value which needs to be "1". So place the bomb under the plate and make sure it won't go anywhere by welding it to the plate or the ground.
- Take out the wire tool again, and wire the bomb to the less then gate, unfreeze the plate and if all goes well, when you or some MingeBag walks on it they go BOOM!
