7 Segment Display

From GMod Wiki

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

{{Deletion|Reason = Not what Garry wants the wiki to be used for}} {{Contraption | name = Creating a 7 Segment Display Timer| author = [[User:Exeption|Exeption]] | date = 2/1/2007 | description = An easy way to make a 3-digit 7-segment display. | edited=[[User:MajesticMoose|MajesticMoose]]}} '''Requirements''': [[User:TAD2020|TAD2020's]] [http://www.garrysmod.org/downloads/?a=view&id=4398 Advanced Wire Indicators]. Alternatively, if you have Wire Mod build >42, you may use the built in indicators. # Create 2 buttons as shown (see image for step 1) on anything. # Create 2 radios on the back as shown (see image for step 2). # Make sure the radios are wired to the button directly behind them. # Create 3 panels to put the 7 segment displays on. # Wire them up using [[:Image:7segtut1.png|this]] setup (see image for step 5). # Create the panels as shown (see image for step 6) and wire as shown (segment G is currently invisible). * Use button 1 to activate and deactivate timer. * Use button 2 to reset timer. {| |[[Image:7segtut3.png|thumb|200px|Step 1]] |[[Image:7segtut2.png|thumb|200px|Step 2]] |[[Image:7segtut1.png|thumb|300px|Step 5]] |[[Image:7segtut4.png|thumb|300px|Step 6]] |} ---- {{Contraption | name = 7 Segment Display| author = [[User:GUN|GUN]] | date = 4/6/2007 | description = An easy way to make a 3-digit 7-segment display. | edited=[[User:MajesticMoose|MajesticMoose]]}} # Okay, start by spawning a large flat prop and weld it to the ground, then place 3, 7 segment displays on it like so.(can be small or large) # Place 3, 7 segment decoders and wire them(I'm guessing you already know how). Then place a timer on the right side. # Spawn a small flat object with a start button(toggle on), then a reset button (toggle off) like in the image for step 3. # Wire the timer(run) to the start button, then wire the timer (reset) to the reset button like in the image for step 4. # Place 2 divides under the two '''LEFT''' 7 seg decoders (the right segment does not need one). # Wire the 7 seg decoders to the divides, and the divides(B) to the constant value like so (the value is set next) then wire the divides(A) to the timer. # Finally its finished it should look like the image for step 7. The very left constant value is '''100''' and the middle value is '''10'''. {| |[[Image:7segtut01.jpg|thumb|200px|Step 1]] |[[Image:7segtut02.jpg|thumb|200px|Step 2]] |[[Image:7segtut03.jpg|thumb|200px|Step 3]] |[[Image:7segtut04.jpg|thumb|200px|Step 4]] |- |[[Image:7segtut05.jpg|thumb|200px|Step 5]] |[[Image:7segtut06.jpg|thumb|200px|Step 6]] |[[Image:7segtut07.jpg|thumb|200px|Step 7]] |} ==Video== [http://www.youtube.com/watch?v=qk1tHDr_GS8 Baked's Video Tutorial] [[Category:Wire Addon Tutorials]] [[Category:Easy Wire Addon Tutorials]]

Return to 7 Segment Display.